If you face issues related to the startup or the shutdown of your projector, please read the instructions below:
Your projector cannot be turned on
- Try to power on your projector from the Power Button located on the back of it
- Disconnect and connect the power cable and try to turn on your projector
Your projector cannot be turned off
- Low battery power. Connect the projector to an external power supply
- Press and hold the Power button on the back of your projector for more than 10 seconds. If this does not work, disconnect the power cable and turn on your projector again
The projector turns off by itself
- Low battery power. Connect the projector to an external power supply
- When your projector is running for a long period of time, the surface becomes hot and your projector can turns itself off due to the temperature sensor so:
- Leave it turned off to cool down
- Ensure the vents and air filter are not clogged with dust or obstructed by nearby objects
- Ensure the environmental temperature is not too hot
- Check if the power cable is correctly connected
If the problem persists follow these steps:
- Turn your projector off by pressing Power on the back of your projector or on your remote control
- Wait at least 10 seconds
- Turn your projector on by pressing Power once on the back of your projector or on your remote control
- If the problem persist again, please contact our technical service centre by sending an email to support@screeneo.com or your dealer
Comments
0 comments
Article is closed for comments.