Congratulations! You have just received your PicoPix Micro 2TV!
When you turn on your projector for the first time or your projector is reset to the factory default settings, you are prompted to make the Android TV setup
After setup, your projector will sign in to your Google account and connect to the same Wi-Fi network as your phone
What you need:
- A Wi-Fi internet connection
- A Google account
Here are the steps to follow:
Step 1: Turn on the projector
- Press the power button on your remote control or on the back of your projector, to turn on your projector. The LED on the projector turns from red to white
-
To turn off your projector, press the power button on your remote control or on the back of your projector, and then press it again when the power-off confirmation message pops up. The LED on your projector turns from white to red
-
The distance between your projector and the screen determines the actual size of the image
Step 2: Pair the remote control with your projector
-
In the remote control pairing interface, you are prompted to pair the remote control with your projector through Bluetooth. Pairing can enable the remote control to work in Android TV mode
-
When prompted for pairing, hold down the OK and VOL- buttons on your remote control for about 10 seconds until the interface shows successful connection
Step 3: Select language
-
When prompted for language section, use the navigation buttons on your remote control to select an on-screen language
Step 4: Set up your projector with your Android phone
-
Set up your projector so that your projector will sign in to your Google account and connect to the same Wi-Fi network as your phone
-
When prompted for Android TV setup, select "Continue" to initialize setup
-
On your Android phone, launch the pre-installed "Google" app. Follow on-screen instructions to complete setup. After successful setup, your projector signs in to your Google account and connects to the same Wi-Fi network as your phone
Comments
0 comments
Please sign in to leave a comment.