You can listen to music on your NeoPix Easy/Easy+ from an USB stick or Micro SD card. Follow these steps:
- Download your music files and add them in your USB stick or Micro SD card
- Plug
- Your USB stick into the USB port located on the side of your projector
- Your Micro SD card into the Micro SD slot located on the side of your projector
FOR EASY:
- Use the Navigation buttons on the top of your projector or on your remote control to select the icon Music top right to activate music media player and access music files
- Select a music file and press OK on the top of your projector or remote control to play music
- Press OK again and the following playback control icons will appear at the bottom of the screen:
- Play: Pause or resume play
- FB: Fast search backward
- FF: Fast search forward
- Previous: Go to the previous music file
- Next: Go to the next music file
- Stop: Stop play
- Repeat all: Select a play mode repeat one/repeat all
- Set A / B / AB: Mark two points to repeat play
- Mute: Mute or restore volume
- Playlist: Access the list of all music files in the folder
- Info: Access current file information
- To turn the volume up or down, please use the volume buttons on your remote control
- To exit a particular mode, press Return on the top of your projector or on your remote control
- When you are done, you can simply remove the USB stick or MicroSD card from your projector
FOR EASY+:
- Use the Navigation buttons on the top of your projector or on your remote control to select the icon Media. The media format options are displayed
- Select USB or Card as a media format and then the media player screen is displayed
- Select Music to activate music media player and access music files. If music media player is selected, only the playable music files can be displayed
- Select a music file and press OK on the top of your projector or remote control to play music
- Press OK again and the following playback control icons will appear at the bottom of the screen:
-
- Previous: Go to the previous music file
- FB: Fast search backward
- Play: Pause or resume play
- Stop: Stop play
- FF: Fast search forward
- Next: Go to the next music file
- Repeat all: Select a play mode repeat one/repeat all
- Select a control function and press OK on the top of your projector or remote control to trigger the control
- To turn the volume up or down, please use the volume buttons on your remote control
- To exit a particular mode, press Return on the top of your projector or on your remote control
- When you are done, you can simply remove the USB stick or MicroSD card from your projector
Watch this Tips & Tricks video for a quick help:
The following file formats are supported:
- Easy: .mp3, .ac3, .eac3, .mpa, .aac, .wma, .ogg, .wav, .flac
- Easy+: .mp1, .mp2, .mp3, .wma, .ogg, .adpcm-wav, .pcm-wac, .aac
Troubleshooting:
- If you face sound issues, please read this article
- If you face connection issues, please read this article
Caution: danger of hearing damage! Before playing music, turn down the volume on your projector. Do not use your projector over a longer time at high volume. This could lead to hearing damage.
Comments
0 comments
Article is closed for comments.