Change settings

This section helps you change the settings of your projector

In the Screeneo S4, this section is divided into 7 categories. You can navigate through them thanks to the Navigation buttons on your remote control. This is how each category is organized: 

LANGUAGE AND INPUT SETTINGS:

• Press Settings option on your remote control and select Language & Input. Then press OK on your remote control to access the language and input options
• Use the Navigation and OK buttons on your remote control to select and change:
  • Language: select your desired language for on-screen menus
  • Time Zone: select your time zone
  • Keyboard Input Method: select English keyboard or Gboard

PICTURE SETTINGS:

• Press Settings option on your remote control and select Image. Then press OK on your remote control to access the picture options
• Use the Navigation and OK buttons on your remote control to select and change:
  • Brightness mode: select a predefined color brightness setting for picture and video display. The different settings are optimized to enable you to use your projector in all situations:
    • Standard: use this for day-time viewing in the presence of some ambient light, e.g. from typical home/office fluorescent lamps or sunlight
    • Cinema: optimised for life-like cinematic color. Ideal for dark environments with low ambient light, e.g. home theater
    • Presentation: provides high brightness, and improves text legibility
    • User: you can configure your own color balance between red, green and blue
  • Aspect Ratio: select a picture format to fit the projection screen
  • Digital Zoom: adjust image sizes
  • Autofocus Settings: enable or disable autofocus function
  • Keystone Correction: correct keystone or distorted images to be rectangular or square
  • Custom Correction: adjust image shape according to your need
  • FlowMotion: switch MEMC (motion estimation motion compensation) for motion interpolation to alleviate display motion blur
• To access color mode: during video play, press Source on your remote control, then use the Navigation and OK buttons on your remote control to access the color setting and its options
  • Color: select a predefined color setting for picture and video display. This setting is independent of the brightness mode. The different modes are optimised for different source content and playback environments:
    • Vivid: improves picture quality in the presence of high ambient light by increasing the color saturation
    • Normal: balanced colors for general viewing
    • Soft: improves comfort in dark environments by reducing picture brightness
    • Game: reduces reaction time and turns off FlowMotion
    • User: in this mode you can configure your own picture settings like brightness, contrast, saturation, sharpness etc

SOUND SETTINGS:

• Press Settings option on your remote control and select Sound. Then press OK on your remote control to access the sound options
• Use the Navigation and OK buttons on your remote control to select and change:
  • Audio Output: select an audio format for sound output when your projector is connected through the digital connector (S/PDIF)
    • PCM: the connected audio device does not support multi-channel format. Audio is down-mixed to two-channel sound
    • RAW: select the original audio output
    • Speaker: play audio through the built-in speakers and disable digital audio output. If the PCM or RAW option is selected, the built-in speakers are disabled
  • System Sounds: turn the system sounds on or off
  • Bluetooth speakers: enable or disable Bluetooth connection when your projector in standby

POWER CONTROL SETTINGS:

• Press Settings option on your remote control and select Power. Then press OK again on your remote control to access the power options
• Use the Navigation and OK buttons on your remote control to select and change:
  • Shutdown: turn off the projector immediately
  • Timed Shutdown: select a time option or customize a period of time so that the projector turns off after the specified period

RESTORE DEFAULT SETTINGS:

• Press Settings option on your remote control and then, use the Navigation and OK buttons on your remote control to select Software Update - Factory Reset
• Follow the on-screen instructions to start or cancel resetting. Note: after resetting to the default settings, all the files and apps you installed are completely erased. Back up your files if you need to reset your projector

CLEAR MEMORY STORAGE:

• Press Settings option on your remote control and then, use the Navigation and OK buttons on your remote control, to select Cleaner and clear browsing history (such as cookies), installation package and system memory stored on the local storage

CHECK MEMORY:

• Press Settings option on your remote control and then, use the Navigation and OK buttons on your remote control, to select About and check the total and available memory (RAM and internal memory) of the local storage.