How to place your projector

You can install your Screeneo S6 in four different configurations: 

• Front table: This is the most common way to position your projector for quick setup and portability. You just place your projector on a table in front of the projection screen
  
  • To adjust projection to the correct position, make sure both the Ceiling and Rear options for projection mode are disabled (press Settings option on your remote control and go to Image - Ceiling and Rear)

• Front ceiling: mount your projector on the ceiling with upside up in front of the projection screen
  • To adjust projection to the correct position, enable the Ceiling option and disable the Rear option for projection mode (press Settings option on your remote control and go to Image - Ceiling and Rear)
    • A projector mount is required to mount the projector on ceiling. Use one recommended by an installation professional and follow the instructions that come with it
    • Make sure the ceiling can support the weight of the projector and mounting kit
    • The product must be securely attached to the ceiling in accordance with the installation instructions, otherwise it may result in accident, injury or damage

• Rear table: place your projector on a table behind the projection screen. A special rear projection screen is required
  • To adjust projection to the correct position, enable the Rear option and disable the Ceiling option for projection mode (press Settings option on your remote control and go to Image - Ceiling and Rear)

• Rear ceiling: mount your projector on ceiling with upside up behind the projection screen. To mount your projector on ceiling behind the screen, a projector mount and a special rear projection screen is required
  • To adjust projection to the correct position, enable both the Ceiling and Rear options for projection mode (press Settings option on your remote control and go to Image - Ceiling and Rear)

To adjust projection to the correct position, press Settings option on your remote control and go to Image. Then, select and enable the appropriate option(s) for projection mode:

Please read this article to learn how to adjust the screen size