Photo playback

You can look at pictures on your NeoPix Easy 2+ from an USB stick or Micro SD card. Follow these steps: 

• Download your pictures and add them in your USB stick or Micro SD card 
• Plug
  • Your USB stick into the USB port located on the side of your projector
  • Your Micro SD card into the Micro SD slot located on the side of your projector

• Use the Navigation buttons on the top of your projector or on your remote control to select the icon Photo top left to activate photo media player and access photo files

• Select a photo file and press OK on the top of your projector or remote control to start slide show
• Press OK again and the following playback functions will appear at the bottom of the screen: 

• • Play: Pause or resume play
  • Previous: Go to the previous photo
  • Next: Go to the next photo
  • Stop: Stop play
  • Repeat all: Select a play mode repeat one/repeat all 
  • Music: Play music 
  • Playlist: Access the list of all photos in the folder
  • Info: Access current file information
  • Rotate: Rotate the photo
  • Zoom in: Zoom in the photo (x2/x4/x8)
  • Zoom out: Zoom out the photo (-1/2 & -1/4)
  • Move view: Pan a zoomed picture up, down, left or right

• To exit a particular mode, press Return on the top of your projector or remote control
• When you are done, you can simply remove the USB stick or MicroSD card from your projector

Note that:

• The projector supports a USB storage device that is formatted for FAT16 or FAT32 file systems
• The following file formats are supported: .jpeg/.bmp/.png /.gif

Troubleshooting:

• If you face screen display issues, please read this article
• If you face connection issues, please read this article
• If you want to adjust image quality, please read this article