To manually adjust your image quality, follow these steps:
Focus:
1. Turn on your projector by pressing the Power button on the top of your projector or on your remote control
2. Once the screen is displayed, use the focus knob on the top of your projector (see picture below) until your desired focus level is met. The knob can twist left or right, and focus can be adjusted to the viewer's preference
Keystone:
1. Turn on your projector by pressing the Power button on the top of your projector or on your remote control
2. Once the screen is displayed, turn the keystone knob on the top of your projector (see picture below) to correct keystone or distorted images to be rectangular or square.
3. Digital Keystone: if you have updated your projector with the latest software version, you can also adjust the digital keystone under Home Menu - Settings
You can also:
- Adjust the Picture settings to improve image quality
- Adjust the screen size
- Try repositioning the projector. Make sure it's parallel with your screen and at the right distance from it
- Clean your projector lens
- Note: To avoid condensation on the lens after bringing your projector in from a cold environment, let your projector warm up to room temperature before using it
- If you are projecting from a computer, try using a lower resolution or try to match your projector's native resolution
Note that blurry or poorly colored images can sometimes simply be fixed by adjusting your projector's focus, contrast and color saturation settings. Dim images can be improved by adjusting your projector's brightness.
Comments
0 comments
Article is closed for comments.