Change settings

This section helps you adjust the settings of your projector. In the PicoPix Nano, it is divided into 4 categories. You can navigate through them thanks to the Navigation button on the side of your projector. This is how each category is organized: 

PHOTOS SETTINGS:

On the Home Menu select Settings - Photos by pressing the Navigation button and then OK on the side of your projector, to change the following settings:

• Aspect Ratio: select an image display format
• Slideshow Duration: select a slideshow interval

VIDEO SETTINGS:

On the Home Menu select Settings - Videos by pressing the Navigation button and then OK on the side of your projector, to change the following settings:

• Display Ratio: select an image display format
• Repeat Mode: select a play mode, e.g. play randomly, play the current music file once, repeat the current music file continuously

MUSIC SETTINGS:

On the Home Menu select Settings - Music by pressing the Navigation button and then OK on the side of your projector, to change the following settings:

• Repeat Mode: select a play mode, e.g. play randomly, play the current music file once, repeat the current music file continuously

SYSTEM SETTINGS:

On the Home Menu select Settings - System Settings by pressing the Navigation button and then OK on the side of your projector, to change the following settings:

• • Projection Direction: select a direction of projection corresponding to particular placement of the projector
  • ECO Mode: activate or deactivate energy saving mode. If Auto is selected, energy saving mode is activated when low battery power occurs
  • Language: select a desired language for on-screen menu
  • Firmware Upgrade: upgrade system via USB or Micro SD card. Firmware version is displayed on the bottom of the system settings interface. Learn more about firmware upgrading by reading this article