First-time setup

Congratulations! You have just received your PicoPix Max One! Here's what you should setup first upon turning on your projector:

• Install the latest software if it's not already done. To do so, read this article
• Get your remote control ready by reading this article
• Press the Power button for 1 sec on the top of your projector or on your remote control, to turn on your projector.The LED indicator on the top of your projector will turn from red to white (if not charging)
  • When charging, the LED on your projector turns red regardless of your projector switching on or off
• Language: Press Settings on your remote control to access the settings menu, then navigate to select Language, and press OK on the top of your projector or on your remote control. Then, press the top/below navigation buttons on the top of your projector or on your remote control, to select your desired language

• Screen size: The projection screen size (or size of images) is determined by the distance between the lens of the projector and the projection surface

  • The projection distance needs to be 1.2 times the width of your desired screen size

  • You can also use the digital zoom to reduce the screen size up to 50%. Press Settings on your remote control to access the settings menu, then navigate to select Digital Zoom, and press OK on the top of your projector or remote control. Then press the top/below navigation buttons to adjust image size

When your basic setup is complete, then you can:

• Adjust the image quality by reading this article
• Turn off the projector by pressing the Power button on the top of your projector or on your remote control. The LED on the projector turns from white (if not charging) to red

For your information, your projector box contains: 

• A remote control 
• Two AAA batteries
• Two power plugs adapter (UK and US)
• A power cable
• A transportable bag
• A lens cover
• A quick Start Guide

The basic setup is complete. You can now fully enjoy your projector!