Change settings – Philips Projection

This section helps you change the settings of your PicoPix Max One:

When the projector is turned on, press OK on the top of your projector or Settings or Input source on your remote control, to access the settings menu
Use the Navigation buttons and OK to select and change settings (For Navigation from the top panel of the projector, please youse up/down/back and OK keys

Capture_d_e_cran_2020-12-15_a__16.28.13.png

Language settings

Navigate to Language, and press OK, then press the top/below navigation buttons to select your desired language for on-screen menu

Input source selection

Navigate to Input Source to access the following settings

Capture_d_e_cran_2020-12-15_a__16.30.28.png

Auto: Automatically switch to the correct input source when an HDMI or USB-C device is connected
HDMI: Select it when an HDMI device is connected
USB-C: Select it when a USB-C device is connected

Note that you need to select a correct input source, so that the projection screen can show images

Picture settings

You can access the following settings:

Keystone Correction: Select an option to correct keystone or distorted images to be rectangular or square
- Auto Keystone: Enable or disable auto correction of the image shape when tilting the projector upwards or downwards. When Auto Keystone is activated, all the other image correction options will be deactivated
- Manual Keystone: Manually adjust four corners of the image
- Manual Horizontal Keystone: Manually correct keystone or distorted images in the horizontal orientation
- Keystone Calibration: Perform this function if the auto keystone correction does not correct the image shape ideally
Projection Direction: Adjust the projection to the correct position based on different installation of the projector
Digital Zoom: Scale the projection image within the range from 50% to 100%
Picture Preset: Select a predefined color brightness setting for picture and video display

Capture_d_e_cran_2020-12-15_a__16.35.53.png

Picture Adjustment: Adjust Brightness/Contrast/ Saturation/Toneburst/Sharpness with the values from 0 to 100

Capture_d_e_cran_2020-12-15_a__16.36.42.png

Color Temperature: Set to Warm to enhance hotter colors such as red; set to Cool to make picture bluish; set to User to customize color values in RGB mode

Power control settings

Go to the following menu options to control power consumption:

Sleep Timer: Select a time option which enables your projector to automatically turn off at a specified period of time
Brightness Mode: Select a screen brightness mode

Capture_d_e_cran_2020-12-15_a__16.40.27.png

Restore default settings

If your projector does not function normally, reset it to the default settings. It will delete all the current settings. To do so, navigate to Full Reset, and press OK on the top of your projector or on your remote control, then follow on-screen instructions to complete resetting

Other settings

You can also access the following options:

Volume: Adjust volume of the projector
CEC: Activate or deactivate easy link between the devices through HDMI connection. Use the projector remote to manage other devices connected to HDMI (dongle for eg)
USB-C Charger: Enable or disable charging of the connected USB-C device
Position: Re-position the settings menu on the projection screen when it appears
SW Version: Display the current software version of the projector
Software Update: Upgrade system software via a USB device