This section helps you change the settings of your PicoPix Micro 2
- To go to the Settings of your projector, turn it on and press the Settings button on your remote (or OK on the back of your projector) to access the settings menu
- Then use the Navigation and OK buttons on your remote to select and change settings
Language settings: Use the Navigation and OK buttons on your remote to go toLanguage, then press the Navigation button on your remote to select your desired language for on-screen menu
Input source selection: Use the Navigation and OK buttons on your remote to go toInput Source and access the following settings:
-
HDMI: Select it when an HDMI device is connected
-
USB-C: Select it when a USB-C device is connected
Note: You need to select the correct input source, so that the projection screen can show images
Picture settings:You can access the following picture settings:
-
Keystone Correction: Select an option to correct keystone or distorted images to be rectangular or square
-
Auto Keystone: Enable or disable auto correction of the image shape when tilting the projector upwards or downwards. When Auto Keystone is activated, manual keystone correction options will be deactivated.
- Manual Keystone: Manually correct keystone or distorted images in the horizontal orientation
-
-
Projection Mode: Adjust the projection to the correct position based on different installation of the projector
-
Picture Preset: Select a predefined color brightness setting for picture and video display, or select User to customize color brightness and image clearness
-
Color Temperature: Set to Warm to enhance hotter colors such as red; set to Cool to make picture bluish; set to User to customize color values in RGB mode
-
Auto Rotate: Automatically rotate the projection screen when the projector is detected being rotated
-
Aspect Ratio: Select a picture format to fit the projection screen
Sound settings: Use the Navigation and OK buttons on your remote to go to Sound Presets, and then press the Navigation buttons on your remote to select a sound mode or customize sound to suit your video or music
Power control settings: Go to the following menu options to control power consumption:
-
Brightness: Select a screen brightness mode
-
Display Duration: Select a timer to automatically turn the screen off when the projector is idle
Restore default settings: If your projector does not function normally, use the Navigation and OK buttons on your remote to go to Factor Restore, then follow on-screen instructions to complete resetting. It will delete all the current settings
Other settings: You can also access the following options:
- Volume: Adjust volume of your projector
- HDMI ARC: Activate or deactivate HDMI ARC function
- HDMI CEC: Activate or deactivate easy link between the devices through HDMI connection
-
Position: Re-position the settings menu on the projection screen when it appears
-
Software Version: Display the current software version of your projector
-
Firmware Upgrade: Upgrade system software via a USB device
Comments
0 comments
Article is closed for comments.