Connecting power supply

Your PicoPix Micro 2 can be operated by either external power or built-in battery

Operation by external power:

• Fix an appropriate plug (EU, UK, US) onto the round base of the power adapter by aligning the pins and holes

  • To detach the plug from the power adapter, hold down the tab at the edge of the round base, and simultaneously turn and unlock the plug from the round base of the power adapter

                

• Connect the power adapter to the socket on your projector, and then to the wall outlet

Operation by built-in battery:

Your projector can be also operated on built-in battery for portability. You have to charge your projector for 1.5 hours before first use.

To charge your projector, connect it to an external power supply. When charging, the LED on your projector turns red in power off mode. When fully charged, the red LED turns off

Note: The capacity of the built-in battery diminishes with time. If the projector functions only with external power supply, the built-in battery is defective. Contact an authorised service centre to replace the built-in battery

If you face startup/shutdown issues, please read this article