You can install your PicoPix Max One in four different configurations:
- Front table: This is the most common way to position your projector for quick setup and portability. You just place your projector on a table in front of the projection screen
- Front ceiling: Mount your projector on the ceiling with upside up in front of the projection screen
- A projector mount is required to mount your projector on ceiling. Use one recommended by an installation professional and follow the instructions that come with it
- Make sure the ceiling can support the weight of your projector and mounting kit
- The product must be securely attached to the ceiling in accordance with the installation instructions, otherwise it may result in accident, injury or damage
- Rear table: Place your projector on a table behind the projection screen. A special rear projection screen is required
- Rear ceiling: Mount your projector on ceiling with upside up behind the projection screen
- A projector mount and a special rear projection screen is required to mount your projector on ceiling behind the screen
- Make sure the ceiling can support the weight of your projector and mounting kit
- The product must be securely attached to the ceiling in accordance with the installation instructions, otherwise it may result in accident, injury or damage
To adjust projection to the correct position:
- Press Settings on your remote control to access the settings menu, then navigate to select Projection Direction. Finally, press OK on the top of your projector or on your remote control to select the desired direction
- Use one of the three keystone corrections proposed: auto correction, manual 4-corner correction or manual horizontal correction. Read this article to learn how to use the different types of Keystone
Please read this article to learn how to adjust the screen size of your projector.
Comments
0 comments
Article is closed for comments.