How to adjust image quality – Philips Projection

To adjust the image quality of your PicoPix Max One, please apply the following instructions:

Focus: Press the Focus button on your remote control to turn focus adjustment on, then press the left/right navigation buttons on your remote control to adjust image clearness. After adjusting image clearness, press the return button on your remote control, to turn focus adjustment off

Auto keystone correction: Your projector can automatically correct the image to be rectangular when you tilt your projector upwards or downwards. To enable auto vertical keystone correction, press Setting on your remote control to access the settings menu, then navigate to select Auto Keystone - On

Manual keystone (4-corner correction): You can manually adjust the image shape by re-positioning four corners of the projection image. This also lets you correct for left or right position of the projector
- Make sure you have selected Auto Keystone - Off to enable this function. Press Settings on your remote control to access the settings menu, then navigate to select Manual Keystone.
- In the 4-corner correction interface, press OK on the top of your projector or on your remote control, to select an image corner, then press and hold the top/bottom navigation buttons on your remote control to adjust the horizontal positioning values, and the left/right navigation buttons on your remote control to adjust the vertical positioning values. Repeat the same step to adjust positioning values of the other image corners if desired

Capture_d_e_cran_2021-03-22_a__15.41.29.png

Manual horizontal correction: You can manually correct keystone or distorted images in the horizontal orientation
- Make sure you have selected Auto Keystone - Off to enable this function. Press Settings on your remote control to access the settings menu, then navigate to select Manual Horizontal. Keystone
- Press the top/below navigation buttons on the top of your projector or on your remote control, to adjust the image shape

Calibration: Correct the image to be rectangular when your projector is placed level, or if the auto keystone correction does not correct the image ideally. Perform image shape calibration as follows:
- Make sure you have selected Auto Keystone - Off to enable this function. Place your projector on the floor or on a straight (level) surface
- Press Settings on your remote control to access the settings menu, then navigate to select Keystone Calibration

Capture_d_e_cran_2021-03-22_a__15.50.08.png